SARbox for DJI Phantom 3 and 4

$127.00Price
SARbox - Smart box converting light to channels for rc vehicles.

This is a cool little box designed for DJI Phantom 3 & 4 but can work with any rc vehicle or even on a wall and you can activate it ONLY by light!
on the Phantom 3 & 4 - you can control the front led lights of the drone from your remote control. this SARbox converts that light into a channel or a power switch that can be used for many purposes in search & rescue mission, drone fishing and also for general filming where you need more extra lights or an extra fpv

* The device has 2 power inputs! you can connect any battery from 3.7v-12v. Using a strong battery will ONLY effect the 7.2v-12v light output - Servo+3.7v led light outputs will only receive a maximum of 5v!
DO NOT CONNECT 2 BATTERIES AT THE SAME TIME!

* The device has 2 Lights outputs. 1=3.7v-5v, 2=7.2v to 12v

* The device has 1 Servo output (you can split it with a "y" cable)

* SARbox can work under maximum of 12v / 1.5A but you can connect “DAL 20A 30A Electronic Swith LED Light Switch PWM 3.7-28V"

Things you can connect using a 3.7v-5v Battery:

360 degrees rotating Servo
FPV Camera tilt mechanism+power to the camera
Payload release mechanism
Retractable landing skids
Laser tilt mechanism+Laser module

Things you can connect using a 7.2v-12v Battery:

Strong external led lights
360 degrees rotating Servo
FPV Camera tilt mechanism+power to the camera
Payload release mechanism
Retractable landing skids
Laser tilt mechanism+Laser module

Listing's options:

(A) SARbox ONLY
1x SARbox (with light sensor)
1x P3 or P4 led cover
1x P3 or P4 screw/anchors to mount on the phantom
1x Remove before flight
1x Camera cleaning cloth
2x 2pin JST male & female cables

(B) SARbox + 3.7 Battery + USB Charger.
1x SARbox (with light sensor)
1x 3.7v Battery
1x USB Charger. 
1x P4 or P4 led cover
2x Flex Anchors (for P4)
1x Remove before flight
1x Camera cleaning cloth
2x 2pin JST male & female cables
Options
For which Phantom?
  • Details

    *** FOR OTHER ADD-ONS, PLEASE CHECK OUR WEBSITE ***

    You can choose a general version (Not for phantom's) which does not have the upper part that connects directly to the phantom and no led covers.

    LIGHTS pre-sets:
    1- Lights turn ON when Phantom's leds are OFF
    2- Lights turn ON when Phantom's leds are ON
    3- Lights FLASH SLOW when Phantom's leds are ON
    4- Lights FLASH FAST when Phantom's leds are ON
    5- One time switch! when clicking the C1 or C2 button the first time after you operate the device, Led lights outputs will turn and STAY ON until you turn off the device.

    SERVO Pre-Sets:

    PRE-SET#1:
    1st click on C1/C2 = Servo will turn CW when phantom's led lights are OFF and stop. 2nd click on C1/C2 = Servo will turn back to its starting position.

    PRE-SET#2:
    1st click on C1/C2 = Servo will turn CW SLOWLY.
    2nd click on C1/C2 = Servo will STOP.
    3rd click on C1/C2 = Servo will turn CCW
    4th click on C1/C2 = Servo will STOP

    PRE-SET#3:
    1st click on C1/C2 = Servo will turn CW when phantom's led lights are ON and stop. 2nd click on C1/C2 = Servo will turn back to its starting position.

    PRE-SET#4:
    1st click on C1/C2 = Servo will continuously move from side to side

    PRE-SET#5:
    Works like option #2 but for 360 degrees servo's ONLY!

    All Packages include:
    1x 2pin male JST cable (for light output)
    1x 2pin female JST cable (for light output)
    1* Remove before flight / I love my DJI Phantom - key chain
    4x Zip ties

    * This product is compatible with PHANTOM-3 Standard as well, HOWEVER, on this drone you can only control the device via the DJI go app and CANNOT set the c1 c2 buttons at this point. maybe DJI will have this option on the P3 standard in the future so please check it on your app if this is important for you to control via c1 or c2.

    Please note that 3D printed parts and NOT molded parts. Therefore the finish will be layered and not smooth with minor imperfections such as some bumps and thin stringing that occurs in any FDM printed process